Because the temperature of water vapor transported inside the high-temperature steam hose is too high and it is continuous operation, the heat transferred from the inside of the high-temperature steam hose is so great that the skin temperature of the high-temperature steam hose reaches more than 120 degrees, which is equivalent to that the high-temperature steam hose works in the dry heat state, while the internal and external rubber of the high-temperature steam hose is generally ordinary EPDM, and the dry heat resistance of ordinary EPDM is not good, Therefore, the outer rubber of many high-temperature steam hoses with a temperature of 170 degrees is more likely to break. The company's API oil cracking drilling and production hose product series has obtained ABS (oil drilling and production and steel wire braided hose assembly) and Lloyd's fire protection certification from American Bureau of shipping. The products are used in high-risk, high-pressure and high-temperature environments, which is enough to prove their reliability. Fully meet the needs of intelligent equipment manufacturing, API oil drilling, mining and metallurgy, rail transit, energy, chemical industry and other fields. Contribute to China's 10-year high-end equipment manufacturing. Steel wire braided hose is an upgraded product of wear-resistant hose, with light weight, small outer diameter and convenient installation. It is suitable for conveying all kinds of raw materials or chemical materials. The temperature is from - 40 ℃ to + 120 ℃, the fluid resistance is small, the imported UPE inner pipe is smooth, the high-strength steel wire is used as the reinforcing layer, and the outer skin is made of high elasticity, wear-resistant and weather resistant materials. On August 12, 2019, Litong Hydraulic Technology Co., Ltd. successfully obtained the 16d certificate issued by American Bureau of shipping. The 16d BOP well control hose is mainly used in the control system to remotely control the opening and closing of blowpipe and deliver hydraulic oil under high pressure. It is an indispensable part of the oil drilling and production platform. Petroleum engineering has extremely strict requirements for safety. Every link and part applied in these engineering are required to be kept in the best state. Just like other equipment accessories, each different accessory product has different styles and sizes. For different customers, our use occasions and needs are different, and our demand for products is also different. We should pay attention to this problem when choosing API 7K oil wear-resistant hose. Here, we suggest that you should pay attention to the model and size of your own equipment before choosing, and see what type of hose we actually need to use, so that the effect of later use will be better. On May 27, 2019, in order to transport highly corrosive liquids under high pressure, the high-pressure multifunctional PTFE / PFA rubber hose with acid and alkali resistance and combined with the special performance of plastic King PTFE / PFA was successfully offline in Litong workshop, which can transport 90% strong acid liquids and 260 ℃ high-temperature liquids. The product overcomes the characteristic that PTFE / PFA does not adhere to any chemical substances.
What are the characteristics of suction and discharge hose?
