In the 17 years of development, Luohe Litong hydraulic has made continuous innovation and independent innovation. It has 17 patent certificates for invention, more than 10 utility model patent certificates, 9 provincial scientific and technological achievements, and the national CNAs certification laboratory, which adopts imported high-end R & D equipment. It has been rated as a high-tech enterprise in Henan and won many honors. Fully meet the needs of high-end equipment manufacturing, petroleum and petrochemical, iron and steel metallurgy, rail transit, energy, chemical industry, pharmaceutical and other fields. The main source of the safety problem of using high-pressure water to clean the hydraulic system is the internal cleaning of the hydraulic pipe. Due to the limitations of the production process, there are already debris and other substances in the production process of the rubber pipe. During the production of the rubber pipe assembly, the colloidal debris generated by cutting will also be the main problem affecting the cleanness of the inner wall of the hydraulic rubber pipe assembly. At present, the ultra-high-pressure water cleaning hose produced by Luohe Litong hydraulic uses ultra-high-pressure water to wash the inner wall, The effect is very good. It is recommended to use it. The high-pressure wear-resistant pipe must be installed in accordance with the installation regulations. The conveying pipeline shall be fixed and fastened. It is strictly prohibited to bend the conveying hose to avoid bursting and endangering the life safety of workers. When the pipeline is blocked, pump it into the end of the soft joint after treatment, the soft joint will swing violently, and the concrete may be sprayed immediately at any time. During this period, workers shall not approach the hose and must ensure the safety of the working process. In the application scenario of oil drilling and production, api7k is a common standard, and the high-pressure pipe meets this standard. This part of hose is a soft connection connecting the drilling and production platform and mud treatment equipment. Generally, dn102 hose is used as the carrier. The main result is that the inner rubber layer (HNBR, NBR), the reinforcing layer is generally wound with several layers of steel wire, and the outer rubber layer is weather resistant and friction resistant rubber; The maximum working pressure of the hose wound with multi-layer steel wire can be more than 100MPa. High voltage anti-wear hose is generally used to transport various granular solid powders, especially in blast furnace, oil refining, petrochemical and other industries. It is more suitable for laying pipelines. It is the main representative of powdery and granular solid transportation in China. According to relevant data, UPE super wear-resistant hose is superior to other conveying hose materials, with better corrosion resistance and certain conveying mechanical properties. Compared with ordinary hose, the wear resistance of conveying materials is better. Features of corrosion-resistant hose 1. Flexible pitch. 2. It has good scalability, no blocking and stiffness. 3. Light weight and good caliber consistency. 4. Good flexibility, repeated bending and flexibility. 5. Good corrosion resistance and high temperature resistance. 6. Anti rat bite and good wear resistance, so as to prevent the internal wires from being worn. 7. Strong bending resistance, tensile performance and side pressure resistance. 8. Soft and smooth, easy to thread, installation and positioning.
What is the process performance of steam pipe?
