Braided hose steam hose is more suitable for conveying steam or boiling water whose temperature is not higher than 150℃. Its characteristics are that its surface layer has good high temperature resistance, and its rubber hose engineering blasting pressure is generally not less than 10 times the pressure. The silicone material steam hose has the characteristics of cold resistance, heat resistance, non-toxic and odorless within the allowable diameter range, and its waterproof and pressure resistance are also very strong. This type of hose is often used to convey liquid fluidity. There are many categories of high-pressure wear-resistant pipes that everyone often talks about. This time, the key point is the construction reinforced concrete pump hose, which is one of the concrete conveying hoses. Its unique characteristics are easy to install and easy to operate. The design scheme greatly improves its corrosion resistance and oxidation resistance. The speed of transporting the mixed material of concrete and mud is many times higher than that of the traditional mud pipe. Tube. The 17th anniversary of Litong was established on April 16th. Today in 2003, Litong announced its establishment. At that time, the scope of Letone was not yet established in China, but the founder firmly believed that Letone had become the manager of the liquid technology field in the world, paving the way for the spirit of innovation. This idea must have been life-threatening at the time, but today, 17 years later, this seemingly unattainable ideal has slowly become reality. Litong hydraulic press has obtained a variety of technical qualification certificates to ensure that it can meet the requirements of customers. Litong has been certified according to product quality, including testing standards (MA), MSHA, American Petroleum Institute (API) API-16C and API-7K, British Transport Agency ABS (crude oil drilling equipment and steel wire), work fire safety verification, etc. . It completely meets the requirements of machinery and equipment production, crude oil exploration, steel metallurgy industry, railway transportation, electric energy, organic chemistry and so on. EPDM hose is a saturated plastic, and it is also a non-polar plastic. Therefore, it cannot be used to transport these non-polar raw oil raw materials, such as diesel engines, motor gasoline, etc. It is often used as steam pipeline rubber hose, water output rubber hose, refrigeration rubber hose and automobile antifreeze rubber hose, etc., for conveying raw materials such as gas, water, warm air, and refrigerant. When the hose of the ultra-high pressure cleaning equipment is in operation, the hose should not be twisted, and the bending should be minimized. If it must be bent, it must be ensured that the bending radius should not be too small, generally not less than 15 times the diameter of the tube, otherwise the steel wire on both sides of the raised layer will be stretched, and the steel wire on the inner side will be reduced, thereby reducing all high pressure The compressive strength of the hose will ultimately endanger the service life of the hose.
Working pressure of air hose？
