In subway stations, pile foundation construction, and drilling works, the fine sand mixed material must be discharged by a technical professional fine sand mixed material plastic hose. The transportation of the excavated fine sand mixed material has always been a troublesome problem. The high-pressure hose is usually used for a long time, and the fine sand mixture will damage the tube body, so it is very fast in several types of work here. However, if the inner rubber collects UPE raw materials, it can ensure the working pressure while ensuring that the pipeline is more wear-resistant and durable. The 300psi furnace door refrigerant plastic hose is the main product of Litong's key commodities, which are mainly used in smelters, glass plants or rolling mills. The structure of the tube body consists of three parts. The internal structure is made of pure white EPDM plastic. The middle is reinforced with high-toughness chemical fiber cotton rope. The surface layer is encapsulated with a layer of EPDM plastic. The dust chamber is encapsulated by glass fiber. In addition, the chemical fiber surface can also have strong temperature resistance. Under the same premise of compression resistance, the oil pipeline composite hose is better than the rubber hose of the same specification. In a small minimum turning radius, it can still work normally, and its bending position continues to maintain a circular shape, and will never produce folding, inner cavity falling, blockage and tube body fracture. Because of the use of ceramic substrate hot-dip galvanized sheet structure, it has good compression resistance, and the plastic hose has a telescopic state when punching to relieve pressure. The key application is oil exploration, crude oil refining, sewage oil solution, petrochemical storage and logistics, storage of animal and vegetable oil, shipbuilding industry, oil port and port, petroleum product airline light fuel oil, etc. On May 16, the CEO said: How to find firmly? Do you have to go deeper into the scene and look at actual and current objects to find out where the weak spots are? Apply the five-why approach to find the real reasons for development bottlenecks. You can't deal with the illness, but it's hard to deal with the illness. This problem cannot be dealt with completely. Only by correcting the problem and eliminating it completely can we stop repeating the problem and bring the depressed work to our work, so that we can release ourselves and solve the diligent situation. LT1217 300PSI hot nicotine bitumen medical dressing delivery pipeline The tube body is used for liposuction and discharge of nicotine and hot bitumen on trucks and oil tankers below 180°C. The internal structure of the pipeline is made of gray-black nitrile rubber. With very good temperature resistance, the high-strength iron wire braiding can effectively maintain the pipe body and work continuously under the working pressure of 300psi. Neoprene is a kind of wear-resistant, air-oxidative, nitrogen-oxygen-resistant, and fire-resistant. It is used to encapsulate the surface of the tube body, which greatly enhances the application characteristics of the tube body. The gate valve of the steam system is easy to discharge heat, resulting in thermal damage. In recent years, the thermal insulation of the steam system has received more and more attention. Because the appearance of the steam safety valve itself is relatively complicated, and the steam safety valve must be repeatedly operated and maintained on time, it is often seen on the spot that the heat pipe has good thermal insulation, but the steam safety valve is not thermally insulated. . The manufacturer of continuous high temperature steam high pressure hose here is a friendly reminder that the steam plastic hose and valve are properly maintained to provide you with higher efficiency and benefits.
Sealing performance of steel wire braided hose
