Litong adheres to the value of "integrity-based, customer first", the company leads all Litong employees to overcome difficulties continuously, and it has also obtained Russia-GOST-petroleum certification and Lloyd's refractory certification at the same time. The company's products are used in harsh environments such as high risk, high pressure and high temperature, which is enough to prove their reliability. For more than ten years, Litong Hydraulic has insisted on taking continuous innovation and development as an opportunity to promote product technological innovation and accelerate the pace of new product development. In our production process, we will encounter problems such as poor stability of the gluing process, too thin gluing, missing coating, less coating, residual solvent and so on. How to solve it, we have a good method: make sure there is a certain coating on the metal surface. In this way, on the one hand, it can ensure that there is enough glue on the metal surface, and the glue that can penetrate into the mold cavity is diffused, and the cross-linking effect can be fully exerted, so that the metal surface is completely bound with vulcanized rubber; on the other hand, from the metal surface From the surface to the surface of the product, a certain modulus gradient layer can also be obtained, so as to gradually transition from soft to hard between the rubber surface of the product and the metal insert. Litong provides high-end operation services for intelligent warehousing, modern electronic management of logistics supply chain, and the establishment of an overall solution for vertical platforms in the industry. Good shipping process. The company has established a complete after-sales service system. As long as there is a product quality problem, the problem can be dealt with in a timely manner to eliminate after-sales worries. Concrete tiling in a certain area of the conveying mortar pipe can be completed by mechanical control or manual control, which has good usability for high-pressure and high-wear working environments. The general working temperature is -29 degrees -80 degrees. The safety factor for personnel and settings is 2~3 times that of ordinary wear-resistant hoses. The outer rubber of the tube is made of weather-resistant synthetic rubber, which can make the tube more durable. What is the difference between high and low pressure oil pipes and low pressure oil pipes: The main difference between low pressure oil pipes and high pressure oil pipes is the different pressure levels of liquid resistance. The low-pressure oil pipe is mainly the oil suction end, and the high-pressure oil pipe is mainly used for output power. The wire is braided or wrapped around the reinforcement layer inside the high pressure oil pipe. The low-pressure pipe body is softened, and there is a cloth or cord in the middle of the pipe body. Theoretically, low-pressure and high-pressure hoses are distinguished by their design pressure levels. However, the same product currently has different standards in different industries. In order to improve the replacement efficiency of the cement slurry and ensure that the cementing truck can efficiently complete the cementing construction task under high pressure, the LT301C high-pressure cement hose adopts 4-6 layers of wound super-strength and high-flexible steel wire or steel wire rope as the reinforcement layer. Tensile and other characteristics, effectively improve construction efficiency and ensure operation safety. Its outer rubber layer is made of wear-resistant and weather-resistant synthetic rubber, which has the characteristics of flame retardant and ozone aging resistance, which greatly prolongs the service life of the hose and its service cycle (the super wear-resistant UPE outer coating can be customized).
How to prolong the life of steel wire braided hose?
