High pressure cleaning equipment requires special fittings for hoses and pipes. These high pressure cleaning hoses and pipes have an o-ring seal and female thread M22x1.5. The fittings come with a variety of corrugated cups that are made of zinc plated carbon steel or stainless steel. They also include nuts. After the hose assembly has been attached, the nut is fitted to it. The nuts come in red, yellow, black, and blue colors. High pressure iron pipe fittings and hose fittings When cleaning ductile iron pipes, high-pressure washing is necessary. Certain fittings are required for high-pressure cleaning equipment. A female threaded M22x1.5 nut is required for the fittings. There are also a range of long and short nuts. Hose assemblies can be attached to these nuts with corrugated cups. You can find nuts in black, yellow and blue as well as red. How Ultra High Pressure Cleaning Hoses Work How do ultra high pressure cleaning iron pipes and hosing fittings function? The fittings for high-pressure cleaning equipment have a M22x1,5 female thread and a corresponding o-ring. They are available with short or long nuts, and some have corrugated cups to facilitate quick mounting of hose assemblies. They can be made from zinc-plated stainless steel, brass, or zinc-plated carbon. Ultra-high-pressure cleaning iron pipe fittings and hose fittings involve applying water at high pressure to dissolve and remove deposits. The water is sprayed using a self-propelled sprayer. To remove stubborn dirt, it is combined with a high pressure hose. The machine also has safety measures, including a dump valve that shuts off the stream of water when the operator loses control. High-pressure washers can be used to clean a wide variety of surfaces. The water jets are pressurized at approximately 100-200 times the air pressure. This translates into 1500-3000 pounds per square in. This powerful cleaning process also helps to remove clogged pipes and drains. Plumbers often use it to remove buildup and unclog clogged drains. High pressure water hose There are two types of hose and iron pipe fittings: male and female quick connect (QC). The former has an o-ring for leak-free connections while the latter has a plug to prevent accidental connection. QC connections are usually standard on hoses. A swivel allows the hose to spin and unkink when you walk out of it. The swivel is important for high-pressure cleaning applications and should be purchased separately. Hose assemblies for combination steam cleaners and pressure washers are also available. The hoses of pressure washers are designed to carry pressurized water jets that remove grease, oil, dirt. The hose is made of synthetic rubber and features a nitrile tube for corrosion resistance. These hoses also have quick disconnect fittings for added safety. For proper sanitation, high-pressure cleaning equipment will be required. Pressure washer hose fittings can be made from different materials depending on the manufacturer. Most common materials are stainless steel, brass and plastic. While plastic may be easier to work with, it is prone to cracking and is easily damaged. Brass is more durable and has a lower melting point. It is also easy to machine. You can also choose a specialized hose for sewer jetting.
Ultra High Pressure Cleaning Iron Pipe and Hose Fittings
