For certain applications, a UPE high pressure industrial hose must meet safety standards. This article explains the reasons for hoses to rupture, the connection and sealing method, and the precautions for using UPE industrial hoses.
the reason for the rupture of the steel wire layer of the UPE industrial hose
The steel wire layer in the UPE high-pressure multifunctional industrial rubber hose is vulnerable to rupture. This failure is a consequence of a tensile force that is generated by the hose during its operation. Replacement may be necessary if the hose is too tight or has a long span. In such cases, an intermediate support clip should be installed to provide a stable connection.
High-pressure steel wire braided high-pressure hoses are widely used for mining, oilfield development and transportation. These hoses are suitable for petroleum-based and water-based liquids. They can be used at temperatures ranging from -40 to 100 degrees Celsius.
This type of hose can also be used in laboratories to cool sensitive equipment. In these applications, the water line must be free from leaks and condensation. Water-laden hoses can cause damage to power cables and dampen their performance.
If the rupture disc is not operated under high pressure, then the system is at risk of failure. In such cases, the UPE multifunctional industrial hose should be used at two-thirds of its MAWP. The exact number depends on the fatigue life, temperature, and load pulsations.
Incorrect installation can lead to a leaking steel wire layer within the UPE high pressure multifunctional hose. The steel wire layer on the hose's outer surface has to be tightly secured to avoid cross-threaded regulators. The cylinder valves should not be cross-threaded. The fittings must match the threads and be in good condition.
The connection and sealing method for the UPE industrial Hose
This type of industrial Hose is ideal for many applications, including construction and exploration. It comes in a variety of sizes, from 1/2 inches to 5/8 inch. The hose fitting is 90 degrees threaded to prevent kinking. The brass connectors can be chrome-plated brass or brass. There are also plastic versions.
Flexible design allows for easy connection and removal, without the need to undergo major pipework reconstruction. It is also easy to clean and maintain. For a streamlined look, the clamp is available separately and has a lip to reduce the risk of blow-off.
GEKA quick couplings can be used for suction and high-pressure applications. GEKA high-pressure couplings fit water hoses of various dimensions. These couplings have an internal thread that can handle pressures of 80 bar. These couplings can be used to connect two water pipes.
It is important to keep volatile materials and oily and flammable liquids separate when using these hoses. These wastes can pose a safety or health hazard if they are not properly disposed. Separators are essential in commercial buildings that house motor vehicles. Besides, the vent terminals should extend to the outer air above the roof line to prevent vent obstruction and the return of sewage gases to the building.
There are three sizes of threaded hose fittings: 1/3, 2/3 and 3/3. They are manufactured from brass and plastics. These fittings can be used in both commercial and industrial horticulture.
the precautions of the UPE industrial hose
When using a hose, it is essential to understand the proper storage and use practices. Hoses should be kept dry and clean at temperatures between 50-70 degrees Fahrenheit. To prevent contamination, the ends of the hose must be covered. When not in use, the hose should be hung with a bend radius smaller than the manufacturer's recommended radius. These precautions will ensure that your hose lasts a long time.
Hoses should be cleaned regularly to reduce internal and external leakage risks. Poor maintenance or cleaning can lead to premature hose failure. EPA and OSHA fines may result from external leaks, and state regulations may also apply. In addition, it is recommended that hoses be replaced if there are problems.