The material from which an industrial hose is made can have a major impact on its performance. PVC is strong, chemical resistant and offers kink resistance. Polyurethane can handle high pressure impulses.
Steel wire bull hose is designed to provide heavy duty compressed air in severe conditions and elevated working pressure service. It is ideal for mining, quarries, construction, sandblasting and equipment rental.
Specifications for textile steel wire air hose
This heavy-duty compressed hose is designed for use in mining, quarries and construction. It can also be used for industrial air placement, equipment rental, sandblasting, etc. It is made from black nitrile blend rubber and has one layer of high tensile steel wire reinforcement. The cover is yellow, and it is resistant to flame, abrasion and weather, oil and ozone. It is pin-pricked and has a wrapped surface.
The SAE 100R5 single-wire braid and textile-covered hydraulic hose can be used to convey petroleum or water based hydraulic oil under medium pressure. It can also be used for power steering, turbo oil lines, and tilt cab cylinders. This hose comes in a variety of sizes and is available in different lengths.
The tube of the air hose is made from a special type of black synthetic rubber, which is highly resistant to abrasion and corrosion. It is also resistant to oils, which makes it a perfect choice for underwater diving, as well as for diving dress and other types of surface supplied diving equipment. It can also be used to connect an Air Compressor and other devices. It is also used for air brakes on tractors and semi-trailers.
Textile steel wire air hose: disadvantages
In addition to their high tensile strength, steel wire air hoses also offer excellent resistance to impulse loads. This type of airhose can withstand the sudden pressure spikes caused by an air compressor turning on or off. This feature helps to prevent ruptures and other failures.
There are a variety of hoses with wire reinforcement. The most common type of hose is the steel wire braid hose. These hoses are used in high-pressure applications and can be found at construction sites, manufacturing plants, and many other industrial environments. These hoses are typically made of PVC, and their steel wire provides strength and flexibility.
These hoses can be damaged by incorrect installation or operation. For example, twisting a hose rather than allowing it to naturally bend can cause it to develop kinks or even burst. Excessive exposure to cold or hot temperatures can also cause the hose become stiff, hard or discoloured. The hose can also build up static electricity if it is not grounded properly. A hose exposed to these conditions too long will eventually lose it's pressure rating. If this occurs, the hose should be replaced as soon as possible. Several types of fittings are available to connect to a hose, including quick-release couplings and male NPT connectors.
Models of textile steel wire air hose
This heavy-duty airhose is designed for use in industrial applications that require higher pressure, such as mining, quarries and construction. Its steel reinforcement withstands abuse such as tugging, pulling, and extreme use. Its cover is resistant to abrasion, weather and oil "mist". This hose is suitable for high pressure environments of up to 600 psi on 2" ID hoses, and 450 psi on 2-1/2" ID. It is available with VIC or HD couplings, and it can be supplied in a variety of standard lengths.
The tube is made from black and smooth synthetic rubber (mostly NBR). It is resistant to abrasion, corrosion, oils, aging, weather, ozone and sunlight. It is also highly tolerant to high temperatures. This hose has a textile wire that is extremely tensile. The cover is yellow and covered with a cloth impression. This hose can be used to convey air, glycol, mineral oil, fuel, and lubricants. It can also be used to deliver water and liquids containing light chemicals. It is widely used in hydraulic systems. It is also used to air brake semi-trailers and tractors. This hose is known as the concrete hose. The hose is available in a range of sizes from 1-1/2" up to 5".